|
Available in 3 sizes, SunWize F-series premium enclosures are cost-effective solutions for housing one to four batteries (up to group size 31) with supporting equipment, engineered specifically for the PV industry. The white powder coated aluminum enclosures all feature hinged, key lockable doors with dust covers on locks, NEMA3R style rainproof design, with gasketed door, special highlow passive cooling ventilation configuration with vent filtration. Mounting features include a tamper resistant mounting bracket (sold separately) allow the use of 2” – 8” pipe U-bolts or band clamps. An integral mounting hangar allows the box to be installed easily without removing the control equipment. All enclosures come with 2 rear 1/2” electrical knockout and provisions for a 15” x 6.5” aluminum back side equipment mounting plate (sold separately) and provisions for a right side equipment mounting plate (sold separately). Space is provided to allow for 1” foam insulation around the battery.
Available in five sizes, E-series economy battery enclosures are cost-effective solutions for housing one to four batteries with supporting equipment. The aluminum enclosures all feature removable covers attached using stainless steel screws, NEMA3R style rainproof design and a brushed finish. E1-38 house up to 1 Group UI battery, feature external mounting tabs to accommodate 2” pipe Ubolts, no security locking features, 3 bottom and 2 rear 1/2” electrical knockout. E1-63 house up to 1 Group 22 battery, feature external mounting tabs to accommodate 2” pipe Ubolts, no security locking features, 2 bottom and 2 rear 1/2” electrical knockout, and rear louver-vent.
The E1-125 through E1-500 house from 1 to 4 group 31 batteries, feature rear mounting holes to accommodate an optional mounting bracket, a security stainless steel door lock-hasp, 2 rear 1/2” electrical knockout, and rear louver-vent, and a 15” x 6.5” aluminum equipment mounting plate. Space is provided to allow for 1” foam insulation around the battery.
Available in 5 sizes, T-series premium enclosures are cost-effective solutions for housing two to eight batteries (up to group size 8D) with supporting equipment, engineered specifically for the PV industry. The white powder-coated aluminum enclosures feature hinged, pad lockable (sold separately) lids with, NEMA3R style rainproof design which allows a continuous gap for air egress. Lids can be propped open for safe service of equipment with a locking hinge. Mounting features include elevated skid feet, and provisions for 1/2” hardware mounting to a concrete pad or steel beam. All enclosures come with 2 left side 1/2” electrical knockout and provisions for a 15” x 6.5” or 17” x 17” left side aluminum equipment mounting plate (sold separately) and provisions for a 17” x 17” lid mounted equipment mounting plate (sold separately). Space is provided to allow for 1” foam insulation around the battery.
Mounting Brackets for F and E Series Enclosures-pole
Brackets are both constructed of aluminum, and feature a slot design that allows the use of 2” – 8” pipe diameter U-Bolts or bandclamps, and a slot that will allow up to 1” thickness banding for large diameter pole mounting. All brackets feature tamper-resistant design and include all stainless steel mounting hardware (U-bolts not included). Premium brackets feature a white powder-coated finish. Economy brackets feature a
brushed aluminum finish.
|
