XW Power Distribution Panel (XW PDP)
 The XW Power Distribution Panel with conduit box is a factory-wired and labeled to support a code compliant single inverter installation. Internal wiring and breakers can be added to expand the system to with up to three inverters, four charge controllers, or other equipment to support larger systems, including three phase. Comes with an XW Conduit Box.
 XW Solar Charge Controller (XW SCC)
The XW Solar Charge Controller tracks the electrical maximum power of a PV array to deliver the maximum available current for charging batteries. It can be used with 12, 24, 36, 48 and 60 volt DC battery systems. For a complete product description turn to page 63. Two controllers can attach to the right side of the XW-PDP.
XW Connection Kit (XW Connection)
The XW Connection Kit is a wiring kit and conduit box used to connect additional inverters into an XW Power Distribution Panel. All wires are measured, pre-cut and labeled to facilitate easy installation.
 
XW Conduit Box (XW Conduit)
The XW Conduit Box is a bare conduit box (no wires) that can be used to create systems larger than two inverters or to retrofit XW Inverters into existing systems which may already have AC/DC disconnects.
XW System Control Panel (XW SCP)
The XW System Control Panel is a Xanbus™-enabled device featuring a graphical, backlit LCD screen that displays system configuration and diagnostic information for all devices connected to the network. When installed as an XW System accessory, the XW SCP eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor an entire XW Power System.
 XW Automatic Generator Start (XW AGS)
The XW Automatic Generator Start is a Xanbus™-enabled device that can automatically activate a generator to provide an XW Series Inverter/ Charger with power to recharge depleted batteries or assist with heavy loads. Compatible with popular generators, the XW AGS adds intelligenceto power management and eliminates time spent monitoring batteries and inverter loads.
Trace Series - TR
The Trace Series Inverter/Charger is an economical power conversion solution designed to provide dependable modified sine wave electricity to essential circuits in the home or business during a power outage. It can also be used in conjunction with a generator or any renewable energy source in an off-grid application. 2-year warranty.
• New digital display shows kilowatts (kW) when inverting and amps (A) when charging, plus incorporates a robust ON/OFF membrane switch and status indicators
• New power factor corrected (PFC) charging, combined with a more sophisticated multi-stage battery charging algorithm, reduces electricity draw and generator run-time
• Better thermal performance allows full output power to 50°C (122°F) without de-rating
• High surge capacity starts more difficult loads and handles overload conditions reliably
• Circuit boards are conformally-coated to protect them from corrosion for longer life & improved reliability
• Idle consumption in search mode <9W
Prosine Inverter Chargers
  Prosine inverter/chargers deliver clean true sine wave output power for all types of appliances along with three-stage charging (compatible with all battery types). Inverters include a full function remote control
panel and built-in transfer switch. CSA/NRTL certified. All Prosine models CSA/NRTL listed to UL-1741, 458. AC output @ 120 Vac - 60Hz single phase. 2-year warranty. The Prosine 3.0 has unusually high no-load drain of approximately 60 watts and <3W in searchmode. The remote on/off switch can be used so that these inverters are only powered up when needed. Temperature sensor optional on these models.
The Prosine 2.0 has a no load drain which is consistent to most sine wave inverters on the market, it only draws 20 watts of power to operate and <2W in sleep mode. It includes the temperature sensor and a remote LCD control module/status display. All models are fan cooled and intended for AC hardwire connections.
Prosine Inverter
 Offering quality true sine wave output, the Prosine inverter is ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, its output is capable of handling both heavy duty and smaller, multiple AC loads. A removable LCD display can be mounted remotely for control and monitoring. The powersave mode draws only 1.5 watts under no load, < 22W - idle. CSA listed to UL-1741, UL-458 and CSA 107.1. Operating temperature range: 0°C to +60°C. All models are 120 Vac - 60Hz single phase output. 2-year warranty.
Xantrex Accessories
  Xantrex offers a number of accessories for their inverters. The T240 is a simple way to operate 240 Vac loads from a single inverter. It also works in reverse and can turn 240 Vac into 120 Vac, this allows the full output of a 240 Vac generator to be used for 120 Vac battery chargers. Includes built-in dual pole 25 amp circuit breaker disconnect. UL listed to UL-1741, 2-year warranty. Battery Temperature Sensors (BTS) are available as options for products which don't include the BTS standard, or as replacements when necessary. The RC is a simple and effective on/off switch for DR inverters. Ground fault protection fits into XW-PDP connection box.
Visit our Contractor Services pages to learn more about ordering and system installation services we offer.
|
