Flexware Power Centers

FLEXware 500
For applications with medium power requirements such as homes
or light commercial power systems, the FLEXware 500 supports
up to two OutBack inverter/chargers and two FM60 or FM80
controllers. Standard FW500 power center assemblies include all
of the protective overcurrent devices, two AC bypass breakers,
two AC input breakers, two AC output breakers, AC I/O bus bars,
and DC main breaker(s). Also included are a 500A DC negative
shunt, negative bus bar, ground bus bar, positive/negative DC bus
bar, DC main breaker bus bar, and a remote battery temperature
sensor. Dual inverter assemblies include a HUB4 communications
manager.
The FW500-AC section functions as a 120/240V AC load breaker sub-panel with space for adding eight OB-AC DIN mount breakers. The FW500-DC section allows DC load circuit breakers by the addition of eight OB-DC panel mount breakers. Space limited when used with FM60 charge controllers and/or PV-GFP. Size: 20.3” H x 46.3” W. Unit weight: 177 lbs.

FLEXware 1000
For applications with more power requirements such as large homes, commercial or village power systems, the FLEXware 1000 supports up to four inverter/ chargers and four FM60 or FM80 controllers. Standard FW1000 power center assemblies include all of the protective over-current devices, four AC bypass breakers, four AC input breakers, four AC output breakers, five AC I/O bus bars, and DC main breakers. Also included is a HUB10 communications manager, X240 stacking transformer, 500A negative shunt, negative bus bar, ground bus bar, positive/negative DC bus bar, DC breaker bus bar and a remote battery temperature sensor. The FW1000-AC section functions as a 120/240V load breaker sub-panel with space for adding sixteen of OB-AC DIN mount breakers.
The FW1000-DC section allows additional DC load circuit breakers, eleven OB-DC .75” panel mount breakers and three 1” wide breakers. Space limited when used with FM60 charge controllers and/or PV-GFP. Size: 40.6” H x 46.3” W. Unit weight: 329 lbs. Many installed options are available for adding charge controllers, AC/DC load breakers, PV ground fault protection, surge protection, step up/down or load balancing transformers and system monitoring.

Flexware FW250

For single inverter applications the FW250 enclosure accommodates all of the essential protective devices in the smallest possible space. Utilizing  in extremely compact design, one FW250 enclosure can be mounted on each end of a single FX Series Inverter/ Charger. The FW250 enclosure is Type-1 indoor (IP30) constructed of silver powder-coated aluminum, includes a generous collection of wiring knockouts and has been ETL listed to UL specifications for USA and Canada. It provides eight breaker spaces (3/4” W PNL
mount) for battery, PV array or PV GFP breakers and mounting locations for AC GFCI outlet, AC breakers and an Input-Output-Bypass Assembly. Also space for one 175A or 250 Amp panel mount breaker and a GFCI-AC outlet (not included). Unit size - inches (H x W x D) = 7.5 x 6.5 x 8.6 Includes: Ground bus bar, DC breaker handle guard, breaker mounting hardware and enclosure mounting hardware.

FLEXware FW500
For larger power systems, the FW500 system architecture can support one or two OutBack FX Series Inverter/Chargers, one or two OutBack charge controllers (side-mounted) and all associated AC and
DC components. A compact design, FW500 AC and DC enclosures attach with a FLEXware MP mounting panel for a fast and professional looking wall-mounted installation. Each inverter requires a set of DCA and ACA conduit adapters. The FW500 enclosure is Type-1 indoor (IP30) constructed of silver powder-coated aluminum, includes a generous collection of wiring knockouts and has been ETL listed to UL specifications for USA and Canada. All DC cables, AC and DC breakers, Input-Output-Bypass assemblies and all other additional components sold separately.

FW500-AC
Enclosure allows wiring AC end of one or two FX series inverters. Unit has sixteen spaces for 1/2” wide DIN breakers, supports six terminal bus bars and one FW-X240.
Unit size - inches (H x W x D) = 18.2 x 11.4 x 12.1
Includes: Ground bus bar, DIN mounting rail, flexible conduit and enclosure mounting hardware.

FW500-DC
Enclosure allows wiring DC side of one or two OutBack FX series inverters, supports six terminal bus bars and three shunt assemblies. Unit has eight spaces for 3/4” wide PNL breakers, three spaces for 1” wide - or two spaces for 1.5” wide PNL breakers. Unit size - inches (H x W x D) = 18.2 x 11.4 x 12.1 Includes: Ground bus bar, 500 Amp DC shunt assembly, positive bus bar, breaker mounting panel and hardware, FW-BBUS and enclosure mounting hardware.

FLEXware FW1000
For applications with large power requirements the FLEXware 1000 system is capable of supporting up to four OutBack FX series inverter attached with two FLEXware MP mounting panels, four OutBack
charge controllers (side-mounted) and all the required AC and DC components and wiring. Each Inverter requires an FW-ACA (or FW-SPACA) and DCA conduit adapters. FW1000 AC and DC enclosures accommodate all of the essential protective devices with lots of room for additional breakers and large cable connections. The FW1000 enclosure is Type-1 indoor (IP30) constructed of silver powder-coated aluminum, includes a generous collection of wiring knockouts and has been ETL listed to UL specifications for USA and Canada.

FW1000-AC
Enclosure allows wiring the AC side of three or four FX series inverters. Unit has 32 spaces for 1/2” wide DIN breakers, supports eight terminal bus bars, one FW-X240.
Unit size - inches (H x W x D) = 38.5 x 11.4 x 12.1
Includes: Ground bus bar, two DIN mounting rails and communication wiring raceway.

Visit our Contractor Services pages to learn more about ordering and system installation services we offer.